GMHighTechPerformance Homepage GM High Tech Performance
Facebook Click here to find out more!

Unbolting The Transmission

 
Unbolting The Transmission
Unbolting The Transmission
With two furniture dollies (bought from Home Depot) under the front subframe and transmission for support, Chris removes the bolts on the trans crossmember, then the strut tower bolts, and finally those that connect the K-member to the frame. View Related Article
Engine In A Truck Bed Attached With A Crane Removing Pcm Disconnecting The Power Steering Lines Unbolting The Transmission Front Control Arms Tied Down Pulling Engine Up Lt1 Engine Removed
Engine Bay With No Engine Blow Torch Used On The Egr Removing Tci 4L60e Transmission Removing Engine Mounting Bolts With A 15 And 18Mm Wrench Clamshell Disconnected From The K Member Energy Usupension Motor Mounts Drilling Out The Rivits On The Clampshell
Disconnecting The Shifter Cable New Scoggin Dickey Shifter Cable Pulling The Shifter Cable From The Interior Balancer Bolts Are Verified Tci Flexplate Installed Race Krafters Egr Block Off Plates Zex Spark Plugs
Installing New Spark Plugs Pace Setters Quick Trip Long Tube Headers Pace Setters Y Pipe Fel Pros Gaskets Installing Pro Setters Long Tube Headers Using Torque Wrench On Long Tube Headers Ntk O2 Sensor
Water Pump Installed New Engine On The Dollie Reinstalling The Alternator Power Steering And Ac Installing Y Pipe Adding 10W30 Motor Oil Uploading Tune Data

 
Get Adobe Flash player
GM High-Tech Performance