|
The plastic shield at the rear of the driver-side rear wheelwell is taken out so that the STS air intake pipe can be installed. Before doing so, the air filter is clamped to its end, which is sheathed with an Outerwears pre-filter that works to keep out dirt and moisture (early versions of this kit had the filter hanging freely under the car). The air intake pipe has a bracket that sandwiches into the fuel filter mount, but we start encountering problems until we realize the factory exhaust hanger has to be removed to get the pipe in the right place. Also notice the screw jack we have placed under the turbo to help line things up. View Related Article
|
|