|
"Pipe 1" takes pressurized air from the outlet of the turbocharger and snakes it over the axle, the first stage of its journey toward the front of the car. We find the factory bracket guiding the driver-side parking brake cable is smack dab in the way of where this pipe needs to be, so we unbolt it from the rear and slide it out of the way. After snapping this photo, Pipe 1 was put in place using a silicone adapter between it and the compressor outlet as well as with two nuts/lockwashers/washers securing it to studs on the oil return pump mounting bracket. View Related Article
|
|